Protect MIP, заказ, установка, сервис и ремонт, замена батарей

Санкт-Петербург

195009, г. Санкт-Петербург
ул. Комсомола, д. 41 лит. А, оф. 521
Тел./факс: (812) 740−38−00
e−mail: spb@rvip.ru

Украина

01042, г.Киев, бульвар Дружбы Народов, 7
Тел.: +38 (044) 531−97−30 (многоканальный)
e-mail: kiev@radiusvip.com.ua
www.radiusvip.com.ua

Protect MIP

Modular, redundant and scalable system for all industrial applications.

Содержание

Protect MIP - Modular Industrial Power
Specification - 1 Rectifi er System

Input:

220/230/240V 1 phase

380/400/415V 3 phase

Output:

24V 50 – 450A

48V 40 – 360A

110V 15 – 135A

220V 9 — 81A

Designed for All Industrial Applications

The Protect MIP offers a new way of achieving reliable and cost-efficient protection for all Industrial market applications including Oil & Gas, Power Generation, Transportation and other Infrastructure.

A modular and scalable design with hot-swappable rectifier modules assures low Mean Time to Repair, reduction in the service cost and meets changing needs and future expansion.

The rectifier system is available with one, three rectifier configurations in wall mounted cabinets and nine rectifier configuration in stand alone cabinet.

The Protect MIP is suitable for charging many types of batteries including: vented lead acid, valve regulated lead-acid (VRLA) or nickel-cadmium batteries. It can also be used as a direct power supply without batteries.

Features & Benefits

• Compact design and low weight

• High power density

• Sinusoidal input current

• High efficiency

• High availability with n+1 internal redundancy

• Low MTTR due to modular design

• High MTBF

• Flexibility of scalable power

• Simplicity of use

• Easy maintenance

Protect MIP - Modular Industrial Power

The Protect MIP DC System has been developed and designed to provide high reliability power supply and battery charging capability.

The Protect MIP DC System is a switch mode controlled rectifier suitable for charging nickel-cadmium or lead-acid batteries while supplying DC loads.

The range of DC Systems is available in the three configurations:

• Standard 1 - rectifier wall or rack mounted system with a built-in rectifier and compact set of options and alarms,

• Standard 3 - rectifier wall mounted system with up to 3 rectifier modules to increase the power and with set of basic options,

• Configured 9 - rectifier stand alone system as flexible DC and Mixed DC & AC Solution with large set of options to comply with special customer requirements.

Standard system configuration – 1 & 3 rectifier systems

The range of standard Protect MIP Systems have been pre-configured with a number of the most commonly requested features built-in as standard. The systems are available “off-the-shelf” with standard drawings and standard user documentation.

A Standard Rectifier Systems options provides a very cost effective and short lead time solution.

Configured system configuration – 9 - rectifier system

The Protect MIP as configured 9-rectifer solution has been developed to meet the most demanding requirements. The system contains the standard set of main components for the operation of the rectifiers and flexible set of standard and engineering options. It can be configured as DC or DC & AC Solution including the configuration with batteries inside the cabinet.

System features and basic options 9 - rectifier system:

• Input voltage 220/230/240V AC Single phase or 380/400/415V AC Three phase

• 19” sub-rack with up to 9 hot swappable rectifier modules 24V- max 9 x50A (450A), 48V- 9 x 40A (360A), 110V- 9x15A (135A), 220V - 9x9A (81A)

• Hot swappable GCAU control card

• Commissioning switch to disable commissioning until manual switch operation

• Front LCD display and keypad

• AC power supply for GCAU control controller

• Load and battery shunts

• Industrial cabinet in RAL 7035 colour with IP21 protection as standard

• Bottom cable entry

Specification - 1 Rectifi er System

RadiusGroup.Ru